Are you running an Intel Linux system with at least one (E)IDE hard drive?
Wouldn't it be neat if there were a magical command to instantly double the I/O performance of your disks? Or, in some cases, show 6 to 10 times your existing throughput?
Did you ever just wonder how to tell what kind of performance you're getting on your "tricked-out" Linux box?
hdparm(8). If you've never heard of it, don't worry. Most
people I've talked to haven't either. But if you're running an IDE/Linux
system (as many folks are,) you'll wonder how you ever got this far without
it. I know I did.
So, you've got your brand-new UltraATA/66 EIDE drive with a screaming brand-new controller chipset that supports multiple PIO modes and DMA and the
leather seat option and extra chrome... But is your system actually taking
advantage of these snazzy features? The
hdparm(8) command will not only
tell you how your drives are performing, but will let you tweak them out to
your heart's content.
Now before you get too excited, it is worth pointing out that under some circumstances, these commands CAN CAUSE UNEXPECTED DATA CORRUPTION! Use them at your own risk! At the very least, back up your box and bring it down to single-user mode before proceeding.
With the usual disclaimer out of the way, I'd like to point out that if you are using current hardware (i.e. your drive AND controller AND motherboard were manufactured in the last two or three years), you are at considerably lower risk. I've used these commands on several boxes with various hardware configurations, and the worst I've seen happen is the occasional hang, with no data problems on reboot. And no matter how much you might whine at me and the world in general for your personal misfortune, we all know who is ultimately responsible for the well-being of YOUR box: YOU ARE. Caveat Fair Reader.
Now, then. If I haven't scared you away yet, try this (as root, preferably in single-user mode):
hdparm -Tt /dev/hda
You'll see something like:
/dev/hda: Timing buffer-cache reads: 128 MB in 1.34 seconds =95.52 MB/sec Timing buffered disk reads: 64 MB in 17.86 seconds = 3.58 MB/sec
What does this tell us? The
-T means to test the cache system (i.e., the
memory, CPU, and buffer cache). The
-t means to report stats on the disk in
question, reading data not in the cache. The two together, run a couple of
times in a row in single-user mode, will give you an idea of the performance
of your disk I/O system. (These are actual numbers from a PII/350 / 128M Ram / newish EIDE HD; your numbers will vary.)
But even with varying numbers, 3.58 MB/sec is PATHETIC for the above hardware. I thought the ad for the HD said something about 66MB per second!!?!? What gives?
Well, let's find out more about how Linux is addressing your drive:
hdparm /dev/hda/dev/hda: multcount = 0 (off) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 1870/255/63, sectors = 30043440, start = 0
These are the defaults. Nice, safe, but not necessarily optimal. What's all this about 16-bit mode? I thought that went out with the 386! And why are most of the other options turned off?
Well, it's generally considered a good idea for any self-respecting distribution to install itself in the kewlest, slickest, but SAFEST way it possibly can. The above settings are virtually guaranteed to work on any hardware you might throw at it. But since we know we're throwing something more than a dusty, 8-year-old, 16-bit multi-IO card at it, let's talk about the interesting options:
When this feature is enabled, it typically reduces operating system overhead for disk I/O by 30-50%. On many systems, it also provides increased data throughput of anywhere from 5% to 50%.
So, since we have our system in single-user mode like a good little admin, let's try out some turbo settings:
hdparm -c3 -m16 /dev/hda/dev/hda: setting 32-bit I/O support flag to 3 setting multcount to 16 multcount = 16 (on) I/O support = 3 (32-bit w/sync)
Great! 32-bit sounds nice. And some multi-reads might work. Let's re-run the benchmark:
hdparm -tT /dev/hda/dev/hda: Timing buffer-cache reads: 128 MB in 1.41 seconds =90.78 MB/sec Timing buffered disk reads: 64 MB in 9.84 seconds = 6.50 MB/sec
WOW! Almost double the disk throughput without really trying! Incredible.
But wait, there's more: We're still not unmasking interrupts, using DMA, or even a using decent PIO mode! Of course, enabling these gets riskier. (Why is it always a trade-off between freedom and security?) The man page mentions trying Multiword DMA mode2, so:
hdparm -X34 -d1 -u1 /dev/hda
...Unfortunately this seems to be unsupported on this particular box (it hung like an NT box running a Java app.) So, after rebooting it (again in single-user mode), I went with this:
hdparm -X66 -d1 -u1 -m16 -c3 /dev/hda/dev/hda: setting 32-bit I/O support flag to 3 setting multcount to 16 setting unmaskirq to 1 (on) setting using_dma to 1 (on) setting xfermode to 66 (UltraDMA mode2) multcount = 16 (on) I/O support = 3 (32-bit w/sync) unmaskirq = 1 (on) using_dma = 1 (on)
And then checked:
hdparm -tT /dev/hda/dev/hda: Timing buffer-cache reads: 128 MB in 1.43 seconds =89.51 MB/sec Timing buffered disk reads: 64 MB in 3.18 seconds =20.13 MB/sec
20.13 MB/sec. A far cry from the miniscule 3.58 we started with...
By the way, notice how we specified the
-c3 switch again? That's
because it doesn't remember your hdparm settings between reboots. Be sure
to add the above line (not the test line with
-tT flags!) to your /etc/rc.d/* scripts once you're sure the
system is stable (and preferably after your fsck runs; having an extensive
fs check run with your controller in a flaky mode may be a good way to
generate vast quantities of entropy, but it's no way to administer a
system. At least not with a straight face...)
Now, after running the benchmark a few more times, reboot in multi-user mode and fire up X. Load Netscape. And try not to fall out of your chair.
This is one of those interesting little tidbits that escapes many "seasoned" Linux veterans, especially since one never sees any indication that the system isn't using the most optimal settings. (Gee, all my kernel messages have looked fine....) And using hdparm isn't completely without risk, but is well worth investigating.
And it doesn't stop at performance: hdparm lets you adjust various power saving modes as well. See the hdparm(8) for the final word.
Many thanks to Mark Lord for putting together this nifty utility. If your particular distribution doesn't include hdparm (usually in /sbin or /usr/sbin), get it from the source at http://metalab.unc.edu/pub/Linux/system/hardware/
Rob Flickenger is a long time supporter of FreeNetworks and DIY networking. Rob is the author of three O'Reilly books: Building Wireless Community Networks, Linux Server Hacks, and Wireless Hacks.
Discuss this article in the O'Reilly Network Linux Forum.
Return to the Linux DevCenter.
Copyright © 2009 O'Reilly Media, Inc.