LinuxDevCenter.com
oreilly.comSafari Books Online.Conferences.

advertisement


System Failure and Recovery Practice
Pages: 1, 2

No shell

This time, we're going get rid of bash, which can't be fixed by booting into single-user mode.

Related Reading

Running LinuxRunning Linux
By Matt Welsh, Matthias Kalle Dalheimer & Lar Kaufman
Table of Contents
Index
Sample Chapters
Full Description
Read Online -- Safari

While writing this article, I discovered a bug in the UML block driver which causes COW files not to work properly when they aren't mounted as the root filesystem. So, we are going to dispense with them for the time being.



Copy root_fs to no_bash, boot it up, log in, and get rid of bash:

% cp root_fs no_bash
% linux ubd0=no_bash

usermode:~# rm /bin/bash
usermode:~# halt

If the halt hangs, halt UML with the mconsole.

Let's boot it up again and see how it does without a shell:

linux ubd0=no_bash

It boots very quickly and it's impossible to log in:

INIT: cannot execute "/etc/init.d/rcS"
INIT: Entering runlevel: 2
INIT: cannot execute "/etc/init.d/rc"

Debian GNU/Linux 2.2 (none) ttys/0

(none) login: root
Unable to determine your tty name.

So, we need to shut it down with the mconsole and figure out how to fix it.

We're going to simulate booting from a rescue disk. We're going to do so using root_fs as the rescue disk, assigning that to be disk 0, and moving the damaged filesystem to disk 1:

% linux ubd0=root_fs ubd1=no_bash

So, log in, mount the damaged filesystem on /mnt and make sure that bash is missing:

usermode:~# mount /dev/ubd/1 /mnt
usermode:~# ls /mnt/bin/bash
ls: /mnt/bin/bash: No such file or directory

OK, this is now easy to fix. We can just copy the shell from the rescue disk:


usermode:~# cp -p /bin/bash /mnt/bin/bash
usermode:~# ls -l /bin/bash /mnt/bin/bash
-rwxr-xr-x  1 root   root    461400 Feb 20  2000 /bin/bash
-rwxr-xr-x  1 root   root    461400 Feb 20  2000 /mnt/bin/bash

Now, you can halt UML and boot it on no_bash to confirm that it again boots OK.

Backups, backups, backups

For our finale, we are going to make a backup of the filesystem and destroy enough of it that fixing it requires restoring the backup. The backup device will be an empty file that's large enough to hold our filesystem:

% dd if=/dev/zero of=backup seek=600 bs=$((1024*1024)) count=1

My filesystem is just over 500MB, so I created a 600MB backup file to allow for any overhead of the backup format. Replace the seek=600 with whatever size is appropriate for you. Now copy root_fs to trashed and boot it up with backup as disk 1.

% cp root_fs trashed
% linux ubd0=trashed ubd1=backup

Log in, and make the backup on /dev/ubd/1. I'm using tar here. If you favor a different backup tool, feel free to use it. Notice that we're not creating a filesystem on this device. It's being used as a raw data device in exactly the same way as a tape.

If it fails with an I/O error, the backup file you created was too small. You can extend it by simply running dd on the file with a larger seek argument and retrying the backup.

usermode:~# tar clf /dev/ubd/1 /
tar: Removing leading '/' from member names
tar: Removing leading '/' from link names

When it's done, we will make "trashed" live up to its name:

usermode:~# rm -rf /bin /lib /usr/lib

Remove anything you like. Feel free to corrupt things, too. When you're done having fun, shut it down, using the mconsole, if necessary.

Now, it's time to fix it back up. Boot UML with root_fs as the rescue, backup as disk 1 again, and trashed as disk 2:

% linux ubd0=root_fs ubd1=backup ubd2=trashed

Now, log in, mount the damaged filesystem on /mnt, cd to it, and restore the backup:

usermode:~# mount /dev/ubd/2 /mnt
usermode:~# cd /mnt
usermode:/mnt# tar xpf /dev/ubd/1  
tar: : Cannot mkdir: No such file or directory
tar: Error exit delayed from previous errors

It succeeded, despite the error:

usermode:/mnt# ls bin
arch   dd        fgrep     ls       pidof     run-parts  touch
...

Now, you can check that it is fixed by halting UML and booting it on "trashed" again and seeing that it's fine.

linux ubd0=trashed

In conclusion

Hopefully this article has convinced you that UML can be a valuable system administration tool. I've demonstrated the creation and recovery of a variety of different types of sysadmin catastrophes.

Obviously, this is only a tiny sample of the possible disasters that can happen. You can ensure that you are prepared for them by making them happen and figuring out how to fix them. It is possible to make them happen on a physical machine, but it should be apparent that simulating them with UML is far more convenient, and almost completely authentic. The devices may have different names, but the procedures are exactly the same as on a physical machine.

With the publication of this article, I am inaugurating the Sysadmin Disaster of the Month on the UML web site at http://user-mode-linux.sourceforge.net/sdotm.html. I will present a disaster and take submissions of solutions. I will arbitrarily choose a winner each month based on criteria such as originality, subtlety, brevity, and parsimony. I will also take submissions of proposed disasters. If you have a disaster that you'd like featured, submit it, along with a proposed solution, if you have one.

Jeff Dike


Return to the Linux DevCenter.


Linux Online Certification

Linux/Unix System Administration Certificate Series
Linux/Unix System Administration Certificate Series — This course series targets both beginning and intermediate Linux/Unix users who want to acquire advanced system administration skills, and to back those skills up with a Certificate from the University of Illinois Office of Continuing Education.

Enroll today!


Linux Resources
  • Linux Online
  • The Linux FAQ
  • linux.java.net
  • Linux Kernel Archives
  • Kernel Traffic
  • DistroWatch.com


  • Sponsored by: